Cem-2 linear cup filling machine
  

Cem-4 rotary filling machine

Cem-2 linear filling machine

Cem-2-R rotary filling machine

Cem-1 rotary  filling machine

Cem-3 cup sealing machine

Cem-01 manual cup filling

Cem-ter water thermoforming

Cem-ter-S thermoforming

This model machine is standard model machine.

This machine is designed for packing the plastic cups with Min. Ĝ 65mm, Max. Ĝ95mm. Packing the plastic cups bigger than Ĝ95mm is not possible with this machine. Also aluminum folio lids used in this machine should be precut lids. CEM-2 machine has not the feature of cutting from the bobbin sealing the lids. For these features CEM-3 machine is appropriate.

Stations of the machine are as follows:

-Plastic Cup Dropping Station
-Filling Station
-Aluminum Foil Lid Placing station
-Sealing Station
-Dating Station
-Exit Conveyor
Technical Specifications

  Capacity

 2.800 pieces/hour

  Chassis

  Complate 304 stainless steel

  Electrical Values

  4 kw, 50 Hz, 380 V

  Filling Capacity

  Max 500 gr

  Dimensions

  1000 x 1300 x 1400 mm

  Max Weight

  600 kg

OPERATION SYSTEM

Plastic cups drop automatically. *Filling and lid  giving stations are running under photocell control if there is a cup and lid.* Photocell control enables the machine to operate without any loss. Aliminium lids are sealed by heat. It dates by ink. Filled and Sealed cups are taken up to the outlet conveyor so that the employer can take them.